D-EIMHP01702-23_00EN- 17/72
2 RECEIVING THE UNIT
The unit must be inspected for any possible damage immediately upon reaching final place of installation. All components
described in the delivery note must be inspected and checked.
Should there be evidence of damage, do not remove the damaged components and immediately report the extent and type of
damage both to the transportation company, asking them to inspect it, and the manufacturer's representative, sending if possible,
photos which may be useful in identifying the responsibilities.
Damage must not be repaired before the inspection of the transportation company representative and the manufacturer's
representative.
Before installing the unit, check that the model and power supply voltage shown on the nameplate are correct. Responsibility for
any damage after acceptance cannot be attributed to the manufacturer.
To Next Page
Loading...
