8.7.9.6 Applications (S6.8.4)
The Applications submenu (S6.8.4) contains information on all applications on the AC drive.
Page Content
6.8.4.# Name of application
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
8.7.9.7 Examining the Application Page
Context:
Use these instructions to examine the Applications pages.
Procedure
1. In the System info submenu, find the Applications page with the Browser buttons.
2. To go to the Applications page, push the Menu button Right.
3. To select the application, use the Browser buttons. There are as many pages as there are applications on the AC drive.
4. To go to the Information pages, use the Menu button Right.
5. To see the different pages, use the Browser buttons.
8.7.9.8 Hardware (S6.8.5)
The Hardware information page includes information on the AC drive hardware.
Page Content
6.8.5.1 Power unit type code
6.8.5.2 Nominal voltage of the unit
6.8.5.3 Brake chopper
6.8.5.4 Brake resistor
6.8.5.5 Serial number
8.7.9.9 Checking the Status of an Option Board
Context:
The Expander boards pages give information about the basic and option boards connected to the control board. See 7.1 Control Unit
Components for more information on the boards.
For more information on the parameters of the option boards, see 8.8.1 Expander Board Menu.
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 113
Danfoss A/S © 2018.06
To Next Page
Need help?
General
