Danfoss Vacon NXP Series - Default Chapter; Table of Contents

Contents
1 Introduction 8
1.1 Purpose of this Operating Guide 8
1.2 Additional Resources 8
1.3 Disposal 8
1.4 Type Approvals and Certifications 8
1.5 Start-up Quick Guide 9
2 Safety 11
2.1 Safety Symbols 11
2.2 Danger and Warnings 11
2.3 Cautions and Notices 13
3 Product Overview 15
3.1 Intended Use 15
3.2 Manual Version 15
3.3 Package Label 15
3.4 Description of the Type Code 16
3.5 Enclosure Sizes 19
3.6 Available Protection Ratings 21
3.7 Available EMC Classes 22
3.8 Control Panel 23
3.8.1 Introduction to Control Panel 23
3.8.2 Keypad 23
3.8.3 Display 25
3.8.4 Basic Menu Structure 26
4 Receiving the Delivery 28
4.1 Checking the Delivery 28
4.2 Storing the Product 30
4.3 Lifting the Product 30
4.4 Using the Product Modified Label 30
5 Mounting the Unit 32
5.1 Environmental Requirements 32
5.1.1 General Environmental Requirements 32
5.1.2 High Altitude Installation 32
5.2 Cooling Requirements 33
5.2.1 General Cooling Requirements 33
5.2.2 Cooling of FR4 to FR9 33
5.2.3 Cooling of Standalone AC drives (FR10 to FR11) 36
Contents
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 3Danfoss A/S © 2018.06