Danfoss Vacon NXP Series - Installing AC Drive in IT System (FR4-FR6)

6.6.1 Installing the AC drive in an IT System, FR4-FR6
Context:
Use these instructions to change the EMC protection of the AC drive to level C4.
Prerequisites:
Open the cover of the AC drive and remove the cable cover as instructed in 6.4.1 Get Access and Locate the Terminals for FR4, 6.4.2 Get
Access and Locate the Terminals for FR5 or 6.4.3 Get Access and Locate the Terminals for FR6.
Electrical Installation
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 69
Danfoss A/S © 2018.06