Danfoss Vacon NXP Series - Selecting Values

Procedure
1. To find the Parameter menu, scroll down in the main menu until the location indication M2 shows on the first line of the display.
READY
G1
Keypad
G8
e30bg023.10
Parameters
2. Push the Menu button Right to move into the Parameter Group Menu (G#).
READY
Keypad
G1 G8
e30bg024.10
Input signals
3. To find the parameter group, use the Browser buttons Up and Down.
READY
Keypad
P1
P18
e30bg025.10
Input signals
4. Use the Browser buttons Up and Down to find the parameter (P#) to edit. To move directly from the last parameter of a parameter
group to the first parameter of that group, push the Browser button Up.
READY
Keypad
e30bg026.10
Min Frequency
13.95 Hz
8.3.2 Selecting Values
Context:
Use these instructions to edit the text values on the control panel.
The basic application package "All in One+" includes 7 applications with different sets of parameters. For more information, see
VACON
®
All in One Application Manual.
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G
88 | Danfoss A/S © 2018.06