Procedure
1. To find the Monitoring menu, scroll down in the main menu until the location indication M1 shows on the first line of the display.
2. To go to the Monitoring menu from the main menu, push the Menu button Right.
3. To scroll through the menu, push the Browser buttons Up and Down.
8.2.1 Monitored Values
The monitored values have the indication V#.#. The values update each 0.3 s.
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G
86 | Danfoss A/S © 2018.06
To Next Page
Loading...
