Danfoss Vacon NXP Series - Control Panel Overview; Keypad Operation

EMC class
in IEC/EN
61800-3 +
A1
VACON
®
equiva-
lent
EMC
class
Description Available for
No EMC
emission
protection
N The AC drives of this category do not give EMC emission protection. These drives are
installed in enclosures.
NOTIC E
An external EMC filter is usually necessary to comply with the EMC emission
requirements.
NOTIC E
RADIO INTERFERENCE
In a residential environment, this product can cause radio interference.
-
Take supplementary mitigation measures.
In IP00
3.8 Control Panel
3.8.1 Introduction to Control Panel
The control panel is the interface between the AC drive and the user. Use the control panel to control the speed of a motor and
monitor the status of the AC drive. Use it also to set the parameters of the AC drive.
The control panel can be removed from the AC drive. The control panel is isolated from the input line potential.
3.8.2 Keypad
The VACON
®
keypad has 9 buttons with which you can control the AC drive (and motor), set parameters, and monitor values.
Product Overview
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 23
Danfoss A/S © 2018.06