Procedure
1. To find the Expander board menu, scroll down in the main menu until the location indication M7 shows on the first line of the
display.
2. To go to the Expander board menu from the main menu, push the Menu button Right.
3. To examine the list of connected option boards, use the Browser buttons Up and Down.
4. To see the information on the option board, push the Menu button Right.
8.8.3 Finding the Option Board Parameters
Context:
Use these instructions to check the values of the option board parameters.
Procedure
1. Find the option board with the Browser and Menu buttons in the Expander Board Menu.
2. To see the information on the option board, push the Menu button Right. For instructions on how to examine the connected
option boards, see 8.8.2 Examining the Connected Option Boards.
3. To scroll to the Parameters use the Browser buttons Up and Down.
4. To examine the parameter list, push the Menu button Right.
5. To scroll through the parameters, use the Browser buttons Up and Down.
6. To go to the edit mode, push the Menu button Right. For instructions on how to edit the parameter values, see 8.3.2 Selecting
Values and 8.3.3 Editing the Values Digit by Digit.
8.9 Further Control Panel Functions
The VACON
®
NX control panel has more application-related functions. See VACON NX Application Package for more information.
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 115
Danfoss A/S © 2018.06
To Next Page
Loading...
Need help?
General
