Danfoss Vacon NXP Series - Using the Control Panel; Navigating on the Control Panel; Monitoring Menu (M1) and Values

8 Using the Control Panel
8.1 Navigating on the Control Panel
Context:
The data of the AC drive is in menus and submenus. Follow these instructions to navigate in the menu structure on the control panel.
Procedure
1. To move between the menus, use the Browser buttons Up and Down on the keypad.
2. To go into a group or an item, push the Menu button Right.
To go back to the previous level, push the Menu button Left.
The display shows the current location in the menu, for example S6.3.2. The display also shows the name of the group or
item in the current location.
READY
RUN
Keypad
A
B
C
e30bf980.10
Monitor
V1
V1
A The location on the menu
C The number of items that are available or the item
value.
B The description (name of the page)
Illustration 40: Navigation Items on the Control Panel
8.2 Using the Monitoring Menu (M1)
Context:
Follow these instructions to monitor the actual values of the parameters and signals.
The values cannot be changed in the Monitoring menu. To change the values of parameters, see 8.3.2 Selecting Values or 8.3.3 Editing
the Values Digit by Digit.
Using the Control Panel
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 85
Danfoss A/S © 2018.06