Danfoss Vacon NXP Series - Page 71

FR6
e30bg096.10
Illustration 28: FR6
2. For FR4, remove the control unit.
There is a sticker next to the terminals to remind to remove the jumper X10-1 if the AC drive requires this. If there is no sticker,
move to step 4.
e30bg472.10
3. Remove the jumper X10-1.
Electrical Installation
Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 71
Danfoss A/S © 2018.06