1.8 ACCESSORIES
The following accessories are available on request for DS8100A:
J-box power unit 110/230 VAC 24 V 120 W
J-box power unit 110/230 VAC 24 V 240 W
J-box power unit 110/230 VAC 24 V 480 W
Bus terminator kit (5 pcs)
Double terminator kit (2 pcs)
10 wire shielded cable D 9.5 mm – 50 m
17-pin scanner/scanner connection cable 1.2 m
17-pin scanner/scanner connection cable 2.5 m
17-pin scanner/scanner connection cable 5 m
Power and bus return cable (last Slave) 5 m
Power and bus return cable (last Slave) 10 m
6K-8K FBUS cable to CBX 1 m
6K-8K FBUS cable to CBX 2 m
6K-8K FBUS cable to CBX 5 m
Fam 6K-8K cross cable 2.5 m
Fam 6K-8K cross cable 5 m
Power and Lonworks termination cable (Master) 5 m
M12-IP67 Ethernet Cable (1 m)
M12-IP67 Ethernet Cable (3 m)
M12-IP67 Ethernet Cable (5 m)
Ethernet Adapter Cable (M12 4-pin male to
RJ45 female)
Datalogic WebSentinel-005
Supervisor (up to 5 arrays)
Datalogic WebSentinel-010
Supervisor (up to 10 arrays)
Datalogic WebSentinel-020
Supervisor (up to 20 arrays)
Datalogic WebSentinel-032
Supervisor (up to 32 arrays)
Datalogic WebSentinel-064
Supervisor (up to 64 arrays)
Datalogic WebSentinel-128
Supervisor (up to 128 arrays)
Datalogic WebSentinel-256
Supervisor (up to 256 arrays)
To Next Page
Loading...
Need help?
General
