Datalogic Gryphon GBT4500 Series User Manual

The GBT/GM4500 Scanner
12 GRYPHON™ I GBT/GM4500
THE GBT/GM4500 SCANNER
Scanner LEDs
Specific LEDs on the Gryphon Scanner provide information
about: good reading result (3GL), battery status and
charging status (with micro USB only). The Battery Status
information can be easily retrieved by double-tapping
with your fingers on top of the head of the scanner. The
following table explains the main colors' combinations
provided by the Battery Status LED.
Table 1 - Battery LED
COLOR
BATTERY
STATUS
Blinking color
(1s ON - 1s OFF)
Green (charge = 50% - 99%)
Red (charge less than 1%)
NOTE: Scanner is unusable
until 1% is reached
Charge in
Progress
through micro
USB
Solid Green
(charge = 100%)
It goes OFF when Scanner
is unplugged
Charge Complete
through micro
USB
Solid color
(3s time-out)
Green (charge = 50% - 100%)
Amber (charge = 2% - 50%)
Red blinking (charge less than 2%)
Battery Status

Datalogic Gryphon GBT4500 Series Specifications

General

Drop Resistance	1.8 m / 5.9 ft
Sealing	IP52
Operating Temperature	0 to 50 °C / 32 to 122 °F
Light Source	LED
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Ambient Light	0 - 100, 000 lux
Drop Specification	Withstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP Rating	IP52
Connectivity	Bluetooth
Battery Type	Lithium-Ion
Decode Capability	1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)	Up to 100 m / 328 ft
Interfaces Supported	USB, RS-232, Keyboard Wedge
Type	Handheld
Technology	2D imager
Scan Rate	60 frames/sec
Supported Barcodes	1D, 2D, Postal
Humidity	5 - 95% (Non-condensing)
Power Supply	5 VDC
Battery	Rechargeable Battery Pack
Weight	245.0 g / 8.6 oz