Datalogic Gryphon GBT4500 Series User Manual

Operating Modes
30 GRYPHON™ I GBT/GM4500
★ = default value
OPERATING MODES
Scan Mode
The reader can be set to operate in one of several scan-
ning modes. See the PRG for more information and set-
tings for any of the following options:
Trigger Single (Default) This mode is associated with the
typical handheld reader operation. When the trigger is
pulled, illumination is turned on and the scanner attempts
to read a label.
Scanning is activated until one of the following occurs:
• the programmable Scanning Active Time
1
expires
• a label has been read
• the trigger is released
Trigger Hold Multiple - When the trigger is pulled, scan-
ning starts and the product scans until the trigger is
released or Scanning Active Time
1
expires. Reading a label
does not disable scanning. Double Read Timeout
1
pre-
vents undesired multiple reads while in this mode.
Trigger Pulse Multiple - Scanning begins when the trigger
is pulled and continues after the trigger is released, until
the trigger is pulled again or until the programmable Scan-
ning Active Time
1
expires. Reading a label does not disable
GREEN SPOT DURATION (CONTINUED)
Medium (500 ms)
Long (800 ms)
1. See the Product Reference Guide (PRG) for these and other pro-
grammable features.

Datalogic Gryphon GBT4500 Series Specifications

General

Drop Resistance	1.8 m / 5.9 ft
Sealing	IP52
Operating Temperature	0 to 50 °C / 32 to 122 °F
Light Source	LED
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Ambient Light	0 - 100, 000 lux
Drop Specification	Withstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP Rating	IP52
Connectivity	Bluetooth
Battery Type	Lithium-Ion
Decode Capability	1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)	Up to 100 m / 328 ft
Interfaces Supported	USB, RS-232, Keyboard Wedge
Type	Handheld
Technology	2D imager
Scan Rate	60 frames/sec
Supported Barcodes	1D, 2D, Postal
Humidity	5 - 95% (Non-condensing)
Power Supply	5 VDC
Battery	Rechargeable Battery Pack
Weight	245.0 g / 8.6 oz