Datalogic Gryphon GBT4500 Series User Manual

Operating Modes
QUICK REFERENCE GUIDE 31
scanning. Double Read Timeout
1
prevents undesired mul-
tiple reads while in this mode.
Flashing - The reader illuminator flashes on and off
regardless of the trigger status. Code reading takes place
only during the Flash On Time
1
. Double Read Timeout
1
prevents undesired multiple reads.
Always On - The illuminator is always ON and the reader
is always ready for code reading. Double Read Timeout
1
prevents undesired multiple reads.
Object Detection - The scanner looks for changes within
its field-of-view. The Aiming Pattern is always on to show
the optimum reading area. If a predefined amount of
movement is detected, the red illumination switches on.
Scanning continues until a label is read or Scanning Active
Time
1
expires.
1. See the Product Reference Guide (PRG) for these and other pro-
grammable features.
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
★ Trigger Single
Trigger Hold Multiple
Trigger Pulse Multiple

Datalogic Gryphon GBT4500 Series Specifications

General

Drop Resistance	1.8 m / 5.9 ft
Sealing	IP52
Operating Temperature	0 to 50 °C / 32 to 122 °F
Light Source	LED
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Ambient Light	0 - 100, 000 lux
Drop Specification	Withstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP Rating	IP52
Connectivity	Bluetooth
Battery Type	Lithium-Ion
Decode Capability	1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)	Up to 100 m / 328 ft
Interfaces Supported	USB, RS-232, Keyboard Wedge
Type	Handheld
Technology	2D imager
Scan Rate	60 frames/sec
Supported Barcodes	1D, 2D, Postal
Humidity	5 - 95% (Non-condensing)
Power Supply	5 VDC
Battery	Rechargeable Battery Pack
Weight	245.0 g / 8.6 oz