EasyManuals Logo

Datalogic Gryphon GBT4500 Series User Manual

Datalogic Gryphon GBT4500 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Power Off
QUICK REFERENCE GUIDE
17
Link Scanner as HID device to a Bluetooth host
Use this procedure to send data to a Bluetooth host using
the Bluetooth HID profile.
1. If using a Bluetooth adapter on the host device, install
any driver provided with the adapter.
2. Scan the Link to Host in HID mode label below to
make the scanner visible to the host device.
3. Use the Bluetooth manager of the host device to "Dis-
cover new devices" and select "GBT4500 …". If you
receive an error message, it may be necessary to
change the security settings on either the host device
or the scanner.
4. On the host device, open the program that is meant
to receive the incoming data.
The data transmitted by the scanner will appear in the
program as if it was typed using the keyboard of the host
device.
Link to Host in HID mode
POWER OFF
Scan the bar code below to shut off power to the hand-
held until the next trigger pull.
Power Off
NOTE: The Gryphon I GBT4500 can be set up to
authenticate the remote system when connecting,
by entering a Bluetooth passkey or a PIN code. If
you want to set the security level and authentica-
tion options suitable for your application, or when
adding new equipment to a system that requires
authentication or uses a custom security PIN,
please see the PRG for information.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Gryphon GBT4500 Series and is the answer not in the manual?

Datalogic Gryphon GBT4500 Series Specifications

General IconGeneral
Drop Resistance1.8 m / 5.9 ft
SealingIP52
Operating Temperature0 to 50 °C / 32 to 122 °F
Light SourceLED
Storage Temperature-20 to 70 °C / -4 to 158 °F
Ambient Light0 - 100, 000 lux
Drop SpecificationWithstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP RatingIP52
ConnectivityBluetooth
Battery TypeLithium-Ion
Decode Capability1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)Up to 100 m / 328 ft
Interfaces SupportedUSB, RS-232, Keyboard Wedge
TypeHandheld
Technology2D imager
Scan Rate60 frames/sec
Supported Barcodes1D, 2D, Postal
Humidity5 - 95% (Non-condensing)
Power Supply5 VDC
BatteryRechargeable Battery Pack
Weight245.0 g / 8.6 oz

Related product manuals