Datalogic Gryphon GBT4500 Series User Manual

The WLC4090 Radio Base
QUICK REFERENCE GUIDE 13
THE WLC4090 RADIO BASE
Radio Base LEDs
LEDs on the Gryphon Base provide information about the
Base as well as battery charging status, as shown in Figure 12.
Figure 12 - Gryphon Base LEDs
Table 2 - Radio Base LEDs
The button can be used to force device connection via the
Datalogic Aladdin Software tool and for paging the scan-
ner when it is activated. Refer to the Gryphon I GD/GM/
GBT 4500 Product Reference Guide (PRG) for a more
detailed explanation.
LED STATUS
1
Power ON / Data
Green On = Base is powered
Green Blinking = Base receives data and
commands from the Host or the Reader.
2Charging
Green On = the battery is completely
charged
Green fading = battery level 51 to 99%
Amber fading = battery level 1 to 50%
Red fading = pre-charge
1
22

Datalogic Gryphon GBT4500 Series Specifications

General

Drop Resistance	1.8 m / 5.9 ft
Sealing	IP52
Operating Temperature	0 to 50 °C / 32 to 122 °F
Light Source	LED
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Ambient Light	0 - 100, 000 lux
Drop Specification	Withstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP Rating	IP52
Connectivity	Bluetooth
Battery Type	Lithium-Ion
Decode Capability	1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)	Up to 100 m / 328 ft
Interfaces Supported	USB, RS-232, Keyboard Wedge
Type	Handheld
Technology	2D imager
Scan Rate	60 frames/sec
Supported Barcodes	1D, 2D, Postal
Humidity	5 - 95% (Non-condensing)
Power Supply	5 VDC
Battery	Rechargeable Battery Pack
Weight	245.0 g / 8.6 oz