Datalogic Gryphon GBT4500 Series User Manual

Pick Mode
QUICK REFERENCE GUIDE 33
PICK MODE
This option specifies the ability of the reader to decode
labels only when they are close to the center of the aiming
pattern, which is the area indicated by the red cross. Pick
Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from
the center of the aiming pattern are not acknowledged or
transmitted to the host. It is active only while the scanner
is in Trigger Single mode. If the scanner switches to a dif-
ferent Read Mode, Pick Mode is automatically disabled.
★ = default value
MULTIPLE LABEL READING
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
NOTE: This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for more
information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
★ Pick Mode = Disable
Pick Mode = Enable

Datalogic Gryphon GBT4500 Series Specifications

General

Drop Resistance	1.8 m / 5.9 ft
Sealing	IP52
Operating Temperature	0 to 50 °C / 32 to 122 °F
Light Source	LED
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Ambient Light	0 - 100, 000 lux
Drop Specification	Withstands repeated drops from 1.8 m / 5.9 ft onto a concrete surface
IP Rating	IP52
Connectivity	Bluetooth
Battery Type	Lithium-Ion
Decode Capability	1D / 2D, Postal Codes, Stacked Codes
Radio Range (Open Air)	Up to 100 m / 328 ft
Interfaces Supported	USB, RS-232, Keyboard Wedge
Type	Handheld
Technology	2D imager
Scan Rate	60 frames/sec
Supported Barcodes	1D, 2D, Postal
Humidity	5 - 95% (Non-condensing)
Power Supply	5 VDC
Battery	Rechargeable Battery Pack
Weight	245.0 g / 8.6 oz