ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
93
DATA Prefix Counter Selection
When Enabled, two character representing a decimal counter are added to transmitted
label. The counter goes from 00 to 99, then returns to 00.
Ex: when the scanner reads the Label “ABC” multiple times, the result is:
00ABC
01ABC
...
99ABC
00ABC
AIDA LED mode
This parameter changes the meaning of indication LEDs of CM9600
For details see
Appendix D, AIDA LED
$CETCE00\r
Prefix Counter = Disable
Prefix Counter = Enable
$CETCE00\r
$CETAI00\r
AIDA LED = Disable
AIDA LED = Enable
$CETAI01\r
To Next Page
Loading...
