Datalogic PowerScan Series User Manual

ENTER/EXIT PROGRAMMING MODE READING PARAMETERS
116 POWERSCAN™ PD/PM/PBT9600
Corded Stand Mode
This parameter sets the Stand Mode operation for corded models only.
Dock Detection Beep
If enabled, when the Handheld reader is placed in a dock (base station or corded stand),
it will beep.
$CSMVS00

Corded Stand Mode = Disable
Corded Stand Mode = Generic Stand
$CSMVS01
$CDDBE00

Dock Detection Beep = Disable
Dock Detection Beep = Enable
$CDDBE01

Datalogic PowerScan Series Specifications

General

Resolution	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Light Source	Visible Laser Diode
Connectivity	USB, RS-232, Keyboard Wedge
Durability	Industrial Grade
Decode Capability	1D and 2D barcodes
Interface	RS-232, USB, Keyboard Wedge
Humidity	5% to 95% non-condensing
IP Rating	IP65
Operating Temperature	0°C to 50°C