Datalogic PowerScan Series User Manual

DATALOGIC 2 OF 5 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 181
DATALOGIC 2 OF 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the reader will not read Datalogic 2 of 5 bar codes.
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Datalogic 2 of 5
check character.
$CD2EN00

Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
$CD2EN01
$CD2CC00

Datalogic 2 of 5 Check Character Calculation
= Disable
Datalogic 2 of 5 Check Character Calculation = Enable
$CD2CC01

Datalogic PowerScan Series Specifications

General

Brand	Datalogic
Model	PowerScan Series
Category	Barcode Reader
Language	English