Datalogic PowerScan Series User Manual

ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
290 POWERSCAN™ PD/PM/PBT9600
Erase Batch Memory
When the reader is configured in Manual Batch Mode, use the following bar code to
erase any labels stored in batch memory.
Erase Batch Memory
BatchClear
Send but do not Erase Batch Memory
When the reader is configured in Manual Batch Mode, use the following bar code to
send any labels stored in batch memory.
Send Batch Memory
BatchOnlySend
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
$CBTTD00

RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 msec
$CBTTD05
$CBTTD0A
RF Batch Mode Transmit Delay =100 msec

Datalogic PowerScan Series Specifications

General

Resolution	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Light Source	Visible Laser Diode
Connectivity	USB, RS-232, Keyboard Wedge
Durability	Industrial Grade
Decode Capability	1D and 2D barcodes
Interface	RS-232, USB, Keyboard Wedge
Humidity	5% to 95% non-condensing
IP Rating	IP65
Operating Temperature	0°C to 50°C