Name: Datalogic PowerScan Series
Brand: Datalogic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ENTER/EXIT PROGRAMMING MODE RS-232 INTERFACE

POWERSCAN™ PD/PM/PBT9600

Handshaking Control

The data interface consists of an RS-232 port designed to operate either with or without

the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Hand-

shaking Control includes the following options:

• RTS — RTS is asserted during transmissions. CTS is ignored.

• RTS/CTS — RTS is asserted during transmissions. CTS gates transmissions.

• RTS/XON/XOFF — RTS is asserted during transmissions. CTS is ignored. XON and

XOFF gate transmissions.

• RTS On/CTS — RTS is always asserted. CTS gates transmissions.

• RTS/CTS Scan Control — RTS is asserted during transmissions. CTS gates transmis-

sions and controls enable and disable state of reader.

$CR2HC00



Handshaking Control = RTS

Handshaking Control = RTS/CTS

$CR2HC01

$CR2HC02

Handshaking Control = RTS/XON/XOFF

Handshaking Control = RTS On/CTS

$CR2HC03

$CR2HC04

Handshaking Control = RTS/CTS Scan Control

Handshaking Control = RTS Off

$CR2HC05

Questions and Answers:

Need help?

Do you have a question about the Datalogic PowerScan Series and is the answer not in the manual?

Datalogic PowerScan Series Specifications

General