Datalogic PowerScan Series User Manual

SETUP
32 POWERSCAN™ PD/PM/PBT9600
USB
The power supply is optional, the cradle can be powered by the USB port. In this case, the
full charging of an empty battery will take about 16 hours with USB and 6,5 hours with
USB type C at ambient temperature. For intense usage and/or when the system is shut
down during the night, the use of an external power supply is recommended.
BC9630
BC9631
ETHERNET
BC9680

Datalogic PowerScan Series Specifications

General

Resolution	Varies by model
Dimensions	Varies by model
Weight	Varies by model
Light Source	Visible Laser Diode
Connectivity	USB, RS-232, Keyboard Wedge
Durability	Industrial Grade
Decode Capability	1D and 2D barcodes
Interface	RS-232, USB, Keyboard Wedge
Humidity	5% to 95% non-condensing
IP Rating	IP65
Operating Temperature	0°C to 50°C