Datalogic QuickScan I QD2400

Enter/Exit Programming Mode
Product Reference Guide 27
ACK NAK Options
This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol. 
See page 208 for more information.
DEFAULT
$CR2AE00(CR)
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE01(CR)
ACK/NAK Protocol = Enable for label transmission
$CR2AE02(CR)
ACK/NAK Protocol = Enable for host-command
acknowledge
$CR2AE03(CR)
ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge