Datalogic QuickScan QBT2400 User Manual

Product Reference Guide 211
WIRELESS FEATURES
This section provides options and programming related to the reader’s wireless communication
features. Reference Appendix B for a listing of standard factory settings.
WIRELESS BEEPER FEATURES starting on page 212
•Good Transmission Beep on page 212
•Beep Frequency on page 212
•Beep Duration on page 213
•Beep Volume on page 214
•Disconnect Beep on page 214
•Docking Beep on page 215
•Leash Alarm on page 215
CONFIGURATION UPDATES starting on page 217
•Automatic Configuration Update on page 217
•Copy Configuration to Scanner on page 217
•Copy Configuration to Base Station on page 218
BATCH FEATURES starting on page 218
•Batch Mode on page 218
•Send Batch on page 219
•Erase Batch Memory on page 219
•RF Batch Mode Transmit Delay on page 219
DIRECT RADIO AUTOLINK starting on page 220
BLUETOOTH-ONLY FEATURES starting on page 221
•Source Radio Address Transmission on page 221
•Source Radio Address Delimiter Character on page 222
•Link Timeout on page 222
•BT Security Mode on page 223
•BT PIN Code on page 224
•Select PIN Code Length on page 224
•Set PIN Code on page 224
•BT Poll Rate on page 225
•Power Off on page 226
•Powerdown Timeout on page 226
starting on page 227
•STAR Radio Protocol Timeout on page 227
•STAR Radio Transmit Mode on page 228
FEATURES FOR STAR MODELS ONLY

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes