Datalogic QuickScan QBT2400 User Manual

Product Reference Guide 53
DATA FORMAT
GLOBAL PREFIX/SUFFIX starting on page 54
GLOBAL AIM ID starting on page 55
LABEL ID starting on page 58
•Label ID: Pre-Loaded Sets on page 58
•Individually Set Label ID on page 59
•Label ID Control on page 59
•Label ID Symbology Selection − 1D Symbolo-
gies on page 60
•Label ID Symbology Selection − 2D Symbolo-
gies on page 64
CASE CONVERSION starting on page 65
CHARACTER CONVERSION starting on page 66
CAUTION
It is not recommended to use these features with IBM interfaces.
The features in this chapter can be used to build specific user-defined data into a message
string. See “References” starting on page 244 for more detailed instructions on setting these
features.

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes