Datalogic QuickScan QBT2400 User Manual

Product Reference Guide 265
Appendix A
Technical Specifications
This section contains Physical and Performance Characteristics, User Environment and Regula-
tory information.
Item Description
QD24XX QM24XX/QBT24XX
Physical Characteristics
Color Black & White
Dimensions
Height 6.4"/163 mm
Length 3
.6"/91 mm
Width 1.6"/41 mm
Weight (without cable) Approximately 5.1 ounces/145 g
Approximately 200 g (reader)
230 g (base charger)
Electrical Characteristics
Voltage & Current
Input Voltage: 4.5 - 14.0VDC N/A
Operating (typical): 140mA N/A
Operating (max): 380mA N/A
Idle/standby (typical): 50mA N/A
Battery Type N/A Li-Ion battery pack
Typical charge time for full
charge from full
discharge
N/A
6 hours with Host Power through the
m
i
cro USB cable connection
N/A
4 hours with Base and 12V external power
supply ada
pter
a
a. Charge Times are much lower when battery is within daily typical operating condition.
N/A
Max 22 hours with Base and Host power
(in this case
no supply adapter is needed)
a
Operating autonomy
(continuous reading)
N/A
30,000 reads
(typical)
Cradle consumption
and DC input supply range
Volt 4.75-14 VDC; Power <8W
b
b. Typical input current measured under factory default configuration.
;
Imax 500mA when in host/bus powered
mod
e
b
.

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes