Datalogic QuickScan QBT2400 User Manual

Enter/Exit Programming Mode
44 QuickScan™ I QD24XX/QBT24XX/QM24XX
Send Control Characters
This feature specifies how the reader transmits ASCII control characters to the host. Reference
Appendix E, Scancode Tables for more information about control characters.
Options are as follows:
Control Character 00 : Characters from 00 to 0x1F are sent as control character Ctrl+Keys, special
keys are located from 0x80 to 0xA1.
Control Character 01 : Characters from 00 to 0x1F are sent as control character Ctrl+Shift, special
keys are located from 0x80 to 0xA1.
Control Character 02 : Special keys are located from 00 to 0x1F and characters from 0x80 to 0xFE
are intended as an extended ASCII table (see "Microsoft Windows Codepage 1252" on
pag
e 301).
DEFAULT
$CKBSC00(CR)
Wedge Send Control Characters = 00
$CKBSC01(CR)
Wedge Send Control Characters = 01
$CKBSC02(CR)
Wedge Send Control Characters = 02

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes