Datalogic QuickScan QBT2400 User Manual

Product Reference Guide 67
READING PARAMETERS
DOUBLE READ TIMEOUT starting on page 68
LED AND BEEPER INDICATORS starting on page 70
•Power On Alert on page 70
•Good Read: When to Indicate on page 70
•Good Read Beep Type on page 71
•Good Read Beep Frequency on page 71
•Good Read Beep Length on page 72
•Good Read Beep Volume on page 73
•Good Read LED Duration on page 74
SCANNING FEATURES starting on page 75
•Scan Mode on page 75
•Stand Mode Indication on page 76
•Stand Operation on page 77
•Pick Mode on page 78
•Stand Mode Sensitivity on page 78
•Stand Mode Illumination Off Time on page 79
•Scanning Active Time on page 79
•Stand Illumination Control on page 80
•Flash On Time on page 80
•Flash Off Time on page 81
•Aiming Pointer on page 81
•Aiming Duration Timer on page 82
•Green Spot Duration on page 83
•Mobile Phone Mode on page 83
•Partial Label Reading Control on page 84
•Decode Negative Image on page 84
•Image Capture on page 85
MULTIPLE LABEL READING starting on page 85
•Multiple Labels per Frame on page 85
•Multiple Labels Ordering by Code Symbology on
page 86
•Multiple Labels Ordering by Code Length on page
86

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes