Datalogic QuickScan QBT2400 User Manual

FEATURES FOR STAR MODELS ONLY
228 QuickScan™ I QD24XX/QBT24XX/QM24XX
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good transmission as soon a
s the Base Station
receives a label
• ACK when sent to host — scanner signals a good
transmis
sion as soon as the Base Station
has sent the label to the host
• ACK from host — scanner signals a good transmiss
i
on as soon as the Base Station has sent
the label to the host and host has replied with an acknowledge message.
DEFAULT
ACK from cradle
ACK when sent to host
ACK from host
The Base Station can receive a host message only if Host Commands Obey/Ignore
(page 25) is set to Ignore.
ACK from host works only for RS-232 or USB-COM interfaces
with ACK/NACK disabled.
If ACK from host is configured with any other interface conditions, it works like ACK
when sent to host.
See
"Message Formatting" on page 229 for details.

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes