Datalogic QuickScan QBT2400 User Manual

WIRELESS FEATURES Enter/Exit Programming Mode
Product Reference Guide 217
CONFIGURATION UPDATES
See page 262 in “References” for detailed information and examples of these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration.
$CBTCU00(CR)
Automatic Configuration Update = Disable
$CBTCU01(CR)
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time con-
figuration update to be performed
on the scanner.
$CCpyCfg2HH
Copy Configuration to Scanner
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with this bar code.

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes