Datalogic QuickScan QBT2400 User Manual

Product Reference Guide 49
USB-OEM INTERFACE
USB-OEM DEVICE USAGE on page 50
USB INTERFACE OPTIONS on page 50
Feature settings for USB interfaces differ
depending upon which host type the reader will be
connected with. Use the feature settings in this chapter to specifically configure for the USB-
OEM interface. Other USB interfaces are included in the appropriate chapter for their host type.
Reference Appendix B, for a listing of standard
factory settings.

Datalogic QuickScan QBT2400 Specifications

General

Connectivity	Bluetooth
Battery Type	Lithium-Ion
Battery Capacity	1400 mAh
IP Rating	IP42
Print Contrast Ratio (Minimum)	25%
Interfaces Supported	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-40 to 70 °C / -40 to 158 °F
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft
Radio Range (Open Air)	100 m
Type	Handheld
Scan Rate	60 frames per second
Resolution	0.1 mm
Humidity	5 to 95% non-condensing
Light Source	Red LED
Supported Barcodes	1D / 2D and postal codes