Datalogic TC1200 User Manual

TC1200 REFERENCE MANUAL
28
3
CODE SELECTION
Description Parameter Value
Code 11
Code 11 Disable C1EN 00
Enable 01
Code Length Control Variable C1LC 00
Fixed 01
Set Length Length 1 (or Min Length) from 2 to 50 characters C1L1 v
Length 2 (or Max Length) 0 or from 2 to 50 characters C1L2 v
Check Options
Check Calculation Disable C1CC 00
Enable Check C 01
Enable Check K 02
Enable Check C and K 03
Check Tx Disable C1CT 00
Enable 01
Decoding Options
Minimum Reads One Read C1MR 01
Two Reads 02
Three Reads 03
Four Reads 04
Decoding Level Disable C1DL 00
Level 1 01
Level 2 02
Level 3 03
Level 4 04
Level 5 05
Character Correlation Disable C1CO 00
Enable 01
Interdigit Ratio 1 to 10 C1IR r
Stitching Disable C1ST 00
Enable 01
v = Hex value from 00 to 32 representing the decimal number
r = Hex value from
00 to 0A representing the decimal number of the interdigit space/module ratio (00 = any ratio)
GS1 Databar Omnidirectional
GS1 Databar Omnidirectional Disable 4BEN 00
Enable 01
GS1-128 Emulation Disable 4BU8 00
Enable 01
Omnidirectional Decoding Options
Minimum Reads One Read 4BMR 01
Two Reads 02
Three Reads 03
Four Reads 04
GS1 Databar Expanded
GS1 Databar Expanded Disable XBEN 00
Enable 01
GS1-128 Emulation Disable XBU8 00
Enable 01
Code Length Control Variable XBLC 00
Fixed 01
Set Length Length 1 (or Min Length) from 1 to 74 characters XBL1 w
Length 2 (or Max Length) 0 or from 1 to 74 characters XBL2 w
Expanded Decoding Options
Minimum Reads One Read XBMR 01
Two Reads 02
Three Reads 03
Four Reads 04
Coupon Control Allow all coupon barcodes to be decoded CPCL 00
Enable only UPC-A coupon decoding 01
Enable only GS1 Databar coupon decoding 02
GS1 Databar Limited
GS1 Databar Limited Disable LBEN 00
Enable 01
GS1-128 Emulation Disable LBU8 00
Enable 01

Datalogic TC1200 Specifications

General

Brand	Datalogic
Model	TC1200
Category	Barcode Reader
Language	English