ADVANCE FD Manual 49 Return to top
9.4.9. Display number setting [DISPLAY NO.]
Display products, including FDs, have a display number setting, and if multiple displays are
to be installed, a different display number must be assigned to each. By default, the
numbers are assigned as follow:
Display products that can be connected to the ADVANCE System and default display No.
ADVANCE FD: No. 6
ADVANCE ZD (discontinued): No. 1
Defi Sports Display F: No. 7
Setting items On the screen Setting options Default
Display number setting DISPLAY NO. 0～7 No.6
Use 【F2 button】 to move the selection frame to [DISPLAY No.].
Press the 【F1 button】 to set the display number.
If the display number is changed, turn the ignition key off and on again.
When removing a display from another vehicle and adding it to a vehicle already
equipped with another display, or when installing multiple new FDs at the same time,
change the display number so that each display does not have the same display number. If
only one display is installed, it is not necessary to change the default number. If multiple
displays with the same display number are linked in one ADVANCE System, they will not
operate properly.
The numbers do not have to be consecutive, and there is no rule for the order of the
numbers.
⇒9.3.8 Active display setting
To Next Page
Loading...
Need help?
General
