ADVANCE FD Manual 58 Return to top
9.7.2.2. Warning display
While the value exceeds the set warning value, the corresponding item in the digital display
turns to a red background.
The oil pressure and fuel pressure display will turn to a red background when the warning
value is less than the set warning value.
At the time, a warning buzzer will sound if the warning buzzer setting is ON.
RPM (digital), RPM (bar), and turbo/intake manifold pressure (bar) will not display a red
background even if the warning value is exceeded. Also, there is no warning function for
vehicle speed or voltage.
Warning buzzers are located on each of the control unit and FD, and can be turned on and
off individually.
When the warning output of the FD is on, the master warning LEDs are lighted, and when
the optional advance indicator is connected to the FD, the advance indicator is lighted.
⇒9.4.8 Warning buzzer setting [DISPLAY WARNING BUZZER]
⇒9.8 Warning setup mode
To Next Page
