124
www.dell.com | support.dell.com
Installing a Hard Drive
1
Check the documentation for the drive to verify that it is configured for your computer.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a
surface, such as a foam pad, that will sufficiently cushion it.
2
Unpack the replacement hard drive, and prepare it for installation.
3
If your replacement hard drive does not have the plastic hard-drive bracket attached, remove the
bracket from the existing drive by unsnapping it from the drive.
1 securing clips (2)
2 hard drive
1 2
To Next Page
Loading...
