Dell GX620 - 3.6GHz Desktop 1GB RAM 80GB Windows XP SFF - Installing the Processor

154
www.dell.com | support.dell.com
4 Open the processor cover by sliding the release lever from under the center cover latch on the
socket. Then pull the lever back to release the processor.
NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any
objects to fall on the pins in the socket.
5 Gently remove the processor from the socket.
Leave the release lever extended in the release position so that the socket is ready for the new
processor.
Installing the Processor
NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.
NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any
objects to fall on the pins in the socket.
1
Follow the procedures in "Before You Begin."
2 Unpack the new processor, being careful not to touch the underside of the processor.
1 center cover latch
2 processor cover
3 processor
4 socket
5 release lever
2
3
4
5
1