Advanced Features 247
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this section may or may
not appear.
System
System Info
Lists the computer name, BIOS version, and service tag.
CPU Info
Identifies whether the computer’s processor supports Hyper-Threading and
identifies the CPU speed, bus speed, clock speed, and L2 cache.
Memory Info
Indicates amount of installed memory, computer memory speed, amount of video
memory, size of the display cache, and channel mode (dual or single).
Date/Time
Displays current date and time settings.
Boot Sequence
The computer attempts to boot from the sequence of devices specified in this list.
Drives
Diskette Drive
This option enables or disables the floppy drive. The options are
Off
,
Internal
,
USB
, and
Read Only
.
Drive 0 through
Drive n
Identifies and enables and disables the drives attached to the SATA or IDE
connectors on the system board and lists the capacities for the hard drives.
NOTE: These options appear as Drive 0 through Drive 3 for the desktop, mini
tower, and small form computers and Drive 0 though Drive 5 for the ultra small
form factor computer.
Module Bay
Enables or disables devices in the module bay. The options are
On
or
Off
. The
default setting is
On
.
NOTE: The USB Controller and Diskette Drive setup option affect operation
of the optional floppy drive in the module bay.
NOTE: This option is only available for the ultra small form factor computer.
Drive Controller
Configures the serial ATA controller’s operating mode.
Normal
enables the serial
ATA controller to operate in its serial ATA native mode only.
Compatible
enables
the serial ATA controller to operate in serial/parallel ATA combination mode.
Error Reporting
This setting determines whether hard drive errors are reported or not during system
setup.
To Next Page
Loading...
