175
Drives
Your computer supports:
• One serial ATA drive
• One FlexBay drive (floppy drive or Media Card Reader)
• One CD or DVD drive
General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the system board. Serial ATA hard drives
should be connected to the connectors labeled "SATA0" or "SATA2" on the system board.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a data cable—to the back of
the drive and to the system board.
1 FlexBay for optional floppy drive or Media Card Reader
2 CD/DVD drive
3 hard drive
1
3
2
To Next Page
Loading...
