Microsoft® Windows® XP Features 301
Setting Up a Home and Office Network
Connecting to a Network Adapter
Before you connect your computer to a network, the computer must have a network adapter installed
and a network cable connected to it.
To connect a network cable:
NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
1
Connect the network cable to the network adapter connector on the back of your computer.
NOTE: Do not use a network cable with a telephone wall jack.
2
Connect the other end of the network cable to a network connection device, such as a network
wall jack.
Network Setup Wizard
The Microsoft Windows XP operating system provides a Network Setup Wizard to guide you through
the process of sharing files, printers, or an Internet connection between computers in a home or small
office.
1
Click the
Start
button, point to
All Programs
→
Accessories
→
Communications
, and then
click
Network Setup Wizard
.
2
On the welcome screen, click
Next
.
3
Click
Checklist for creating a network
.
NOTE: Selecting the connection method This computer connects directly to the Internet enables the
integrated firewall provided with Windows XP SP1.
4
Complete the checklist and required preparations.
5
Return to the Network Setup Wizard and follow the instructions on the screen.
To Next Page
Loading...
