Ultra Small Form Factor Computer 209
3
Hold the bottom piece of the cable cover and align the four tabs with the four slots on the
computer’s back panel.
4
Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration)
until the cable cover is securely positioned.
5
Install a security device in the security cable slot (optional).
Removing the Cable Cover
1
If a security device is installed in the security cable slot, remove the device.
2
Press on the release button, grasp the cable cover, and slide the cover to the left until it stops, and
then lift the cable cover up and away.
1 cable cover
2 security cable slot
1 release button
2
1
1
To Next Page
Loading...
