45
Drives
Your computer supports:
• Two serial ATA hard drives
• Two floppy or optional Zip drives
• Two CD or DVD drives
NOTE: Due to the limited number of drive bays and IDE controllers on this computer, you will not be
able to connect all supported devices at once.
General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the system board. Serial ATA hard drives
should be connected to the connectors labeled "SATA0," SATA1," "SATA2," or "SATA3" on the
system board.
1 CD/DVD drive
2 floppy drive
3 hard drive
1
3
2
To Next Page
Loading...
