184
www.dell.com | support.dell.com
Installing a CD/DVD Drive
1
Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for
your computer. Configure the drive for the cable select setting.
2
Connect the CD/DVD drive cables to the drive.
3
Lower the drive into the drive bracket and align the two drive bracket tabs with the holes on the
side of the drive. Then attach the two screws to the side to secure it.
4
Gently position the drive until it clicks into place.
1screws (2)
2 drive bracket
3 CD/DVD drive
4 CD/DVD drive cable
1 CD/DVD drive
2 CD/DVD drive cable
3screws (2)
4 drive bracket
5 alignment tabs (2)
1 2 43 5
To Next Page
Loading...
