43
I/O Panel
Removing the I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before removing the cover.
NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when
installing the new I/O panel.
1
Follow the procedures in "Before You Begin."
NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result
in damage to the cable connectors and the cable routing clips.
2
Remove the screw that secures the I/O panel. Press on the release button and pull on the loop to
slide the card away from the computer.
3
Disconnect all of the cables from the I/O panel, and remove the panel from the computer.
3
4
5
2
1
To Next Page
Loading...
