174
www.dell.com | support.dell.com
4
From inside the computer cover, remove the mounting screws that secure the I/O panel to the
computer.
5
Remove the I/O panel from the computer.
Replacing the I/O Panel
1
To replace the I/O panel, follow the removal procedures in the reverse order.
NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place and use the notch
on the I/O panel bracket to help seat the card.
1 securing screw (2)
2 I/O panel
3 I/O cable connector
4 I/O connector pull loop
To Next Page
Loading...
