181
5
Check all connectors to be certain that they are properly cabled and firmly seated.
6
Gently position the drive until it clicks into place.
7
Check all connectors to be certain that they are properly cabled and firmly seated.
8
Replace the computer cover.
9
If the drive you just installed is the primary drive, insert a bootable medium into your boot drive.
10
Turn on the computer.
11
Enter system setup and update the appropriate
Primary Drive
option (
0
or
2
).
12
Exit system setup, and reboot the computer.
13
Partition and logically format your drive before you proceed to the next step.
For instructions, see the documentation that came with your operating system.
1 power cable
2 serial ATA data cable
1 release tabs (2)
2 hard drive
1
2
To Next Page
Loading...
