187
1
Remove the floppy drive.
2
Align the screws on the drive with the bracket rails in the computer, and gently position the drive
until it clicks into place.
3
Insert the floppy-drive cable into the cable release tab on the floppy drive and press down on the
tab until it clicks to lock it in place.
4
Insert the floppy-drive cable into the cable release tab on the system board and press down on the
tab until it clicks to lock it in place.
1drive
2screws (3)
3 bracket rails (3)
1
3
2
To Next Page
Loading...
