223
NOTICE: Do not place any heavy objects on top of the computer. Doing so may bend the chassis and
cause difficulty in removing a module device.
4
Pull the device by the latch release to remove the device from the module bay.
5
Slide the new device into the module bay.
6
If desired, you may lock the new device in the module bay by moving the module locking switch
to the locked position.
7
If you removed the cover to lock the device in the module bay, replace the computer cover.
Installing a Device When Your Computer Is Running Microsoft® Windows®
1
If a device is installed in the module bay, double-click the
Safely Remove Hardware
icon on the
taskbar.
2
Click the device you want to eject.
NOTE: You cannot remove a device if your computer is turned on and the device is locked in the
module bay. You must shut down the computer and follow the steps in "
Installing a Device When
Your Computer Is Turned Off
" to remove a locked device.
NOTICE: Do not place any heavy objects on top of the computer. Doing so may bend the chassis and
cause difficulty in removing a module device.
3
When a computer message indicates that you can remove the device, unplug the device from the
computer.
4
Slide the new device into the module bay.
1 latch release
1
To Next Page
Loading...
