260 Battery
www.dell.com | support.dell.com
NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the system
board with the object. Ensure that the object is inserted between the battery and the socket before you
attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or
by breaking circuit traces on the system board.
NOTICE: To avoid damage to the battery connector, you must firmly support the connector while
removing the battery.
4
Remove the system battery.
a
Support the battery connector by pressing down firmly on the positive side of the connector.
b
While supporting the battery connector, press the battery tab away from the positive side of
the connector and pry the battery it up out of the securing tabs at the negative side of the
connector.
NOTICE: To avoid damage to the battery connector, you must firmly support the connector while
replacing the battery.
5
Install the new system battery.
a
Support the battery connector by pressing down firmly on the positive side of the connector.
b
Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive
side of the connector.
1
system battery
2
positive side of battery connector
3
battery socket tab
4
battery socket
2
4
1
3
To Next Page
Loading...
