Configuring the vFlash Media Card for Use With iDRAC6 227
Resetting the vFlash Media Card
Open a Telnet/SSH text console to the server, log in, and enter:
racadm vmkey reset
CAUTION: Resetting the vFlash media card with the RACADM command resets
the size of the key to 256MB and deletes all existing data.
NOTE: For more information about vmkey, see "vmkey." The RACADM command
functions only if a vFlash media card is present. If a card is not present, the
following message is displayed: ERROR: Unable to perform the requested operation
Ensure that a SD Card is inserted.
To Next Page
Loading...
